APPLICATIONS
-
Airports
- Embassies
- Shoping centers
- Schools
- Jailhouses
- Entertainment environments
- Other locations where security is a concern
SPECIFICATIONS
Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5Standard and produced under ISO 9001: 2008 QMS
(Chinese Metal Detectors comply their own National Norms Only)
We do not use China Made Production Input.
(Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper Users Manual)
Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms
(Far East Equipment Certification could be Potato Stamp)
No Set Up Change is Necessary regarding Winter/Summer Seasonal Adjustments and Resistant to Vibration & Impact
(Far Eastequipment my require Adjustments as per Temperature Changes)
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
Give Alarm to all threat objects detected at different Alarm Zones.
(Chinese equipment detects the Largest Threat Objects while others are not detected at the same time)
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interferences between Zones and No False Alarms
(Chinese equipment does not operate like this once detect and then not)
Multi-Zone - 3 Detection Zones (Left/Middle/Right)
Homogeneous Magnetic Field No Dead Points Same Detection Capability from bottom to top
10 sensitivity levels, 246 adjustable sensitivity steps at each
Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
(Certification with Chinese Equipment should be carefully checked)
Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
Five Digit Incoming Counter (Visible/Invisible)
IR Pass Sensor ON/OFF Selection
Four-digit changeable digital Pin Code
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE Built-in Test Equipment)
Reloading the factory default settings by one-touch button
Easy programming and monitoring with wide LCD display
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
IP 20 Protection Level (EN 60529)
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
Audio-Visual alarms are noticeable at a range of 2 meters
Micro-Processor Settings does not change when there is an electricity cut-off
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.
Weight: 51 kg
Gross weight: 60 kg
Operating voltage:70VAC 270VAC / 50Hz - 60Hz
Power: 10W Stand By- 20W (Alarm)
Package Dimensions (W x H x L):
Box 1: 560 x225 x 2270 mm
Box 2: 225 x 235 x 790 mm
Ambient Temperature: -20°C to +70°
