APPLICATIONS
-
Airports
- Embassies
- Shoping centers
- Schools
- Jailhouses
- Entertainment environments
- Other locations where security is a concern
SPECIFICATIONS
International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Separate Zone Sensitivity Setting Feature
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
SMART DETECTOR Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interferences between Zones and No False Alarms
Homogeneous Magnetic Field No Dead Points Same Detection Capability from bottom to top
Detects Metals regardless their orientation
20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
Adjustable Alarm Duration (Detection Speed Regardless Alarms)
IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
IP 44 Protection Level (EN 60529)
Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display Function on LCD
Reloading the factory default settings by one-touch button
Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
Installation and Operation without interference between two detectors up to a distance of min. 5 cm
Audio-Visual alarms are noticeable at a range of 4 meters
Micro-Processor Settings does not change when there is an electricity cut-off
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE Built-in Test Equipment)
SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 ImagesOptional
•Weight: 56 kg
•Gross weight: 64 kg
•Operating voltage:70VAC 270VAC / 50Hz - 60Hz
? Power: 10W Stand By- 20W (Alarm)
•Package Dimensions (W x H x L):
Box 1: 620 x230 x 2265 mm
Box 2: 790 x 230 x 400 mm
•Ambient Temperature: -20°C to +70°
