APPLICATIONS
-
Airports
- Embassies
- Shoping centers
- Schools
- Jailhouses
- Entertainment environments
- Other locations where security is a concern
SPECIFICATIONS
International norm (NILECJ-0601-0602/NIJ/EN60950 Class1/IP 44 In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS and ECAC DOC 30 STANDADRD 2 COMPLIANCE
Multi-Zone 9 Real Detection Zones
(15 Distinct Detection Zones Divided Scanning Area and properly displayed Zone Led Indicators with Special Coil Geometry)
Separate Zone Sensitivity Setting Feature
Standard Preset JAILHOUSE/AIRPORT/MILITARY/POLICE PREMISES,SHOPPING MALL Security Modes
Whilst Normal Operation, displays IN/OUT Counters and Security Level on GRAPHICAL LCD without abbreviations so that Security Staff can easily understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
SMART DETECTOR Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interferences between Zones and No False Alarms
Homogeneous Magnetic Field No Dead Points Same Detection Capability from bottom to top
Detects Metals regardless their orientation
20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, 5 Preset Programs
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
Adjustable Random Alarm possibilities to give alarm for clean visitors at a selected ratio.
Record Statistics of Operation Duration, Number of Visitors and Alarms (Real/Random Alarms Separately)
Special Environmental Magnetic Interference Display Menu
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
Adjustable Alarm Duration (Detection Speed Regardless Alarms)
Reloading the factory default settings by one-touch button
Five Digit Incoming/Outgoing &Alarm Counters (Visible/Invisible) Reset
IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE Built-in Test Equipment)
Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects
Installation and Operation without interference between two detectors up to a distance of min. 5 cm
Audio-Visual alarms are noticeable at a range of 4 meters
Micro-Processor Settings does not change when there is an electricity cut-off
Magnetic Field inside all passage area is 0,1 Gauss
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
OPTIONALS
SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images Optional
IRDA Remote Control Unit (Optional)
Detection Functions has been tested with ECAC/NIJ/TSA Test Kits and Certified
